● The internal casting is treated with High solids Epoxy coating, which can improve the anti-corrosion and extend the product lifetime.
● Standard design, incorporating a dry motor with thermal Auto-cut Protector that prevents the motor from over heating. Equipped with a cast iron motor frame for a faster heat dissipation. As well as an abrasion resistant mechanical seal and an additional oil seal.
● Water cooled motor to ensure a long life in continuous and intermittent operation, with high efficiency and energy savings.
● An exceptional High-lift and suction impeller design, which allows for dewatering of underground or circulating water applications.
● For above or below surface water applications; the IC pump strainer can be easily removed and replaced with a check valve, which allows for dewatering up to max. 8m deep of underground water and water circulation applications. (W–Well Type)
● New casing cover, with metric thread bolt hole that is easier for valve and adapter connection.
● The chrome steel impeller has been adopted for IC-32B~610, with hardness of HRC 25~30; better anti-corrosion, and extended product lifetime.
● High solids Epoxy coating prolong metals from corrosion and oxidization.
HCP pump selection system
Quickly online search and model selection platform
Assist you to instantly get your model information!
Experience immediately ▶ https://e-selection.hcppump.com.tw/
50Hz
Item | Description | |
---|---|---|
Limits of Use |
Liquid Temp. | 0~40°C (32~104°F) |
Applications |
Agriculture irrigation • Circulating water • Dewatering |
|
Type | Frequency | 50Hz |
Motor | 2P (3000rpm) • Dry Motor | |
Insulation | Class F (1.5~5HP) • Class H (7.5~10HP) | |
Protection | IP68 | |
Protector | Auto-cut | |
Bearing | Ball type | |
M.seal | Double M.seals | |
Impeller | Close | |
Material | Outer Cover | SUS304 |
Upper Cover | FC200 | |
Motor Frame | SUS304 (1.5HP) • FC200 (2~10HP) | |
Shaft | SUS403 (1.5~3HP) • SUS304 (5~10HP) | |
M.seal | CA/CE & SiC/SiC | |
Casing | FC200 | |
Impeller | BC (1.5HP) • Chrome Steel (2~10HP) | |
Cable | VCT or H07RN-F or SJOW/SOW | |
Optional | Pumps can be customized to fit specifications |
60Hz
Item | Description | |
---|---|---|
Limits of Use |
Liquid Temp. | 0~40°C (32~104°F) |
Applications |
Agriculture irrigation • Circulating water • Dewatering |
|
Type | Frequency | 60Hz |
Motor | 2P (3600rpm) • Dry Motor | |
Insulation | Class F (1.5~5HP) • Class H (7.5~10HP) | |
Protection | IP68 | |
Protector | Auto-cut | |
Bearing | Ball type | |
M.seal | Double M.seals | |
Impeller | Close | |
Material | Outer Cover | SUS304 |
Upper Cover | FC200 | |
Motor Frame | SUS304 (1.5HP) • FC200 (2~10HP) | |
Shaft | SUS403 (1.5~3HP) • SUS304 (5~10HP) | |
M.seal | CA/CE & SiC/SiC | |
Casing | FC200 | |
Impeller | BC (1.5HP) • Chrome Steel (2~10HP) | |
Cable | VCT or H07RN-F or SJOW/SOW | |
Optional | Pumps can be customized to fit specifications |